6101 OMNI TILE ADHESIVE (EN 12004 R2) for Indoor Floor & Wall
description1
INTRODUCTIONPRODUCT
01Tuoxin 6101 adhesive is a professional-grade, highly flexible EN 12004 R2 modified epoxy adhesive, it is engineered with exceptional bond strength and superior deformability, making it compatible with a wide range of decorative surface materials and construction substrates.
FeaturesPRODUCT
01One layer of the adhesive to bond all,
• EASY – Saving Labor Cost and Material Cost
• Clean – No Powder, No Need to Remove Mesh or Release Agent on Marble/Tiles
• Ultra Bonding Strength & Superior Flexibility
• Clean up Easily with Water
• Formaldehyde-Free & Low-VOC
• EASY – Saving Labor Cost and Material Cost
• Clean – No Powder, No Need to Remove Mesh or Release Agent on Marble/Tiles
• Ultra Bonding Strength & Superior Flexibility
• Clean up Easily with Water
• Formaldehyde-Free & Low-VOC
PerformancePRODUCT
Harmonized Standards: EN 12004:2017
| Item | Data | |
| Color | A: White | B: Green (or white for choice) |
| Appearance | A: Thick paste | B: Thick paste |
| Mixing Ratio by Weight | 1:1 | |
| Pot Life | 60 mins (25℃) | |
| Surface Drying Time | 10-12 hours (25℃) | |
| Consumption | 1.5-2.0kg/mm/m2 (depending on substrate, suggest 3-5mm thickness) | |
| Package | A: 5KG + B: 5KG per bucket | |
| Shelf Life | 18 months | |
ApplicationPRODUCT
The next-generation 6101 adhesive is ideal for challenging tiling installations, including:
• Marble, natural stone, and large-format slab tiling;
• Ceramic tile installation in vibration-prone zones
(such as elevator shafts, wind tunnels, and door/window frames);
• Tile-over-tile renovations via thin-bed application;
• Wet areas, including showers, kitchens, and swimming pools;
• Underfloor heating systems.
• Marble, natural stone, and large-format slab tiling;
• Ceramic tile installation in vibration-prone zones
(such as elevator shafts, wind tunnels, and door/window frames);
• Tile-over-tile renovations via thin-bed application;
• Wet areas, including showers, kitchens, and swimming pools;
• Underfloor heating systems.
Construction Steps PRODUCT
1. Mix component A and B in a 1:1 weight ratio. (Note: Do not add water or other materials during mixing; otherwise, the product will lose its performance.)
2. Use a serrated scraper to apply a thin layer on the back of the tile, no need to remove the release agent.
3. Pave directly on the base substrates;
4. Waiting for Curing: After construction is completed, wait for 24 hours of curing before it can bear weight.
Precautions
This product cannot be used for paving on loose and sanding substrates, or those coated with back glue or wall consolidant.
Adding water during construction is strictly prohibited. If the mixed product becomes sticky and hardens beyond the workable time, it must not be used again.
When using this product for construction in harsh environments or on special materials, consult our technical personnel first.
The company shall not be held responsible for quality problems arising from improper construction or construction not under the guidance of our application technology department.
The product description is subject to the latest version released by our company. Our company reserves the right to interpret and revise the above product description.