9203 EPOXY TILE GROUT
description1
introductionPRODUCT
01Tuoxin 9202 Epoxy Tile Grout is a high-performance, two-component grouting system formulated from epoxy resins, curing agents, and specialized silica fillers. Unlike traditional cement-based grouts, epoxy grout relies on a chemical reaction to cure rather than water evaporation. This creates a dense, virtually impenetrable barrier that is exceptionally strong, 100% waterproof, and completely non-porous.
It is engineered for both residential and commercial applications where maximum durability, hygiene, and stain resistance are required.
ApplicationPRODUCT
Idea for both vertical wall and horizontal floor configurations across full-room layouts. Highly suitable for roofs, kitchens, bathrooms, shower rooms, washrooms, external building facades, underground engineering, basements, and various liquid containment structures/tanks.
FeaturesPRODUCT
• Ultra Tensile Strength
• Extreme Substrate Adhesion
• Superior Deep Penetration
• Outstanding Wear Resistance
• Long-Term Weatherability
• Rich Color Options
• Formaldehyde-Free & Low-VOC
PerformancePRODUCT
| Item | Data | |
| Color | A: Clear | B: Grey |
| Appearance | A: Liquid | B: Liquid |
| Mixing Ratio by Weight | 1:01 | |
| Pot Life | 30 mins (25℃) | |
| Surface Drying Time | 2-3 hours (25℃) | |
| Consumption | 0.1-0.15kg/m2/layer (suggest 2 or 3 layers) | |
| Package | A: 5KG + B: 5KG per bucket | |
| Shelf Life | 18 months | |
Construction Steps PRODUCT
1. Prepare the necessary tools: glue gun, gloves, towel, cleaning brush, squeeze ball or a scraper, etc.Then clean the gap and clean the dirt in the gap.
2. Unscrew the head of the bottle, pull out the inner plug, screw on the mixing nozzle and put it into the special glue gun.
3. Put the front end to ensure that the AB components are glued out at the same time. Discard the front 40cm and apply glue along the gap surface.
4. After finishing the glue, use a squeeze ball or a muti-function scraper to laminate under the gap surface and straighten the glue strip.
5. The curing will be fast in 3-5 hours after construction, and the product will show the surface is completely dry the next day. If the glue overflows, tear it off by hand or use a tool to remove it.
CustomizationPRODUCT
Rich colors for choice.