Tuoxin 6301 Film Reaction Resin Ceramic Tile Adhesive for Floor and Wall
description1
INTRODUCTIONPRODUCT
01The reaction resin ceramic tile adhesive is primarily used for bonding ceramic tiles to various substrates in both residential and commercial settings, offering strong and durable adhesion. It provides superior bonding strength, water resistance, and flexibility compared to traditional cement-based options, making them more suitable for challenging environments. It is formulated to be low in volatile organic compounds (VOCs), aligning with sustainable building practices and reducing harmful emissions.
FeaturesPRODUCT
01R2 standard, with ultra bonding strength;
With excellent deformability, 360° bending without cracking;
Good workability;
Formaldehyde-free & Low-VOC certified;
EN 12004 certified.
PerformancePRODUCT
Harmonized Standards: EN 12004:2017
| Essential characteristics | Performances | Test Results |
| Reaction to fire | -- | Class E |
| Open time,after 20 minutes | ≥0.5 N/mm²after not less than 20 minutes | 4.1N/mm²(±0.6 N/mm²) |
| Initial shear adhesion strength | ≥2.0N/mm² | 10.0N/mm²(±0.6 N/mm²) |
| Shear adhesion strength after water immersion | ≥2.0N/mm² | 8.7N/mm²(±0.8 N/mm²) |
| Shear adhesion strength after thermal shock | ≥2.0N/mm² | 9.4N/mm²(±0.6 N/mm²) |
| Release of dangerous substances | NPD | NPD |
ApplicationPRODUCT
It is ideally suited for new tile installations when used in conjunction with cement mortar or C0/C1 tile adhesives. This solution not only reduces costs significantly but also ensures seamless installation of large-format slabs, effectively preventing issues like hollowing and tile detachment.
Construction Steps PRODUCT
1. Mix component A and B in a 1:1 weight ratio. (Note: Do not add water or other materials during mixing; otherwise, the product will lose its performance.)
2. Use a serrated scraper to apply a thin layer on the back of the tile, no need to remove the release agent.
3. Pave directly on the base substrates;
4. Waiting for Curing: After construction is completed, wait for 24 hours of curing before it can bear weight.
Precautions
This product cannot be used for paving on loose and sanding substrates, or those coated with back glue or wall consolidant.
Adding water during construction is strictly prohibited. If the mixed product becomes sticky and hardens beyond the workable time, it must not be used again.
When using this product for construction in harsh environments or on special materials, consult our technical personnel first.
The company shall not be held responsible for quality problems arising from improper construction or construction not under the guidance of our application technology department.
The product description is subject to the latest version released by our company. Our company reserves the right to interpret and revise the above product description.